A7V multiplier problem!!!

I can't get 9.5x on my board it is either 9x or 10x.

Does anyone have this problem or doI have the wrong dip switch settings ?


"off on off off"

future said:

I can't get 9.5x on my board it is either 9x or 10x.

Does anyone have this problem or doI have the wrong dip switch settings ?


"off on off off"

Click to expand...

Wrong set of dip switches, I think!
The set of 4 are for the FSB setting. The set of 5 switches is for the multiplier.

Oh, and welcome to the forums.

Should be 6 dips......

09.0X - 1 on 2 on 3 off 4 off 5&6 on
09.5X - 1 off 2 on 3 off 4 off 5&6 on
10.0X - 1 on 2 off 3 off 4 off 5&6 on

If it is a A7V forget the FSB if it is a A7V133 then the FSB is worth messing with.

first 4 switchs are you fsb they should all be in the on spot and the next 6 are what -=-^^ he said they are

Nope. the dip switches are right could it be that my L1 bridges are not all connected and only allow me to go up to 9x?

Are your L1 bridges connected?
If so are you setting the Voltage Core to 1.85V?
I had to bump mine all the way up to get it to 1008Mhz@101x10.

FSB on the A7V is only going to go up to 113Mhz FSB stable.
And that is a big if..... my board can go up that high but the PCI cards start to get really weard at that level.

I can only get network to work @ 1mb/sec at these FSB speeds...so I changed the FSB back to 100....default is actually 101Mhz.

If you have PC100 in your machine it might work at 133 on your Dram Speed setting... mine did I only noticed little differance so I changed it back.

Well hope you get the thing working soon.......