How Fast is Your 1700+ Tbred-B?

[silentfire]

how can u have a aiuga and a B core???????
that makes no sense

 

[tediber]

BIG L you have a T-bred A and all i can see in your sig that would hold you back from reaching say 200FSB ..... is either your motherboard or definitely you'll need to lower your multiplier further as your cpu has about reached it's stable limit in terms of speed

 

[felinusz]

Highest I have hit *stable* (24 hour prime) is 2357 MHz. (11.5 x 205) with a 1.725 Vcore on my JIUHB 0319 DLT3C.

I actually haven't reached any further stable as I am limited by my board's Vcore options. Pin modded I will probably get a little bit higher on that extra Vcore. We shall see.

 

[sHape oF gReY]

220x11 on 1.9Vcore
210x12 on 1.9vcore

Both are stable, based on 24hrs of P95 with no errors.

See sig for details.

 

[[OC]This]

2760mhz prime95 stable, and all the rest.

normal apps @ 2794mhz

 

[attack]

Awesome OC [OC]This!

My DLT3C is running [email protected] on a NF7-S
WC'ed by 89 camero heatercore, 6.75" fan, maze 2 and eheim 1250

load temps are 52c (I'm gonna try to get these lower and break 2.6)

This is when my 6.75" fan is at 12v, with a 7v mod it's completely very silent but my stable OC drops to 2510 @ 1.95v

OCthis can you give us more info...i.e MB, maybe pictures of that cooling as well as voltages.

 

[[OC]This]

Awesome OC [OC]This!

My DLT3C is running [email protected] on a NF7-S
WC'ed by 89 camero heatercore, 6.75" fan, maze 2 and eheim 1250

load temps are 52c (I'm gonna try to get these lower and break 2.6)

This is when my 6.75" fan is at 12v, with a 7v mod it's completely very silent but my stable OC drops to 2510 @ 1.95v

OCthis can you give us more info...i.e MB, maybe pictures of that cooling as well as voltages.

thank you ajrettke.

you have a quite a nice oc out of your setup as well.


sorry i have no pics for my chilled setup. I still don't have a digital camera, shame shame..

the vcore is at around 1.97v@ 2794mhz. water temp is below 0C. cpu temp is around 16c for normal apps.

 

[climbski]

Mine is at 233x11 2573mhz at 2.06V temp 30C 24/7 Folding Cooling is a standard $100 airconditioner bought at Walmart funny thing is it gets less stable at higher Voltage. Does this board allow 3dmark links if so i can show proof if you need it.

 

[Tekime]

2.33GHz, 1.7V, rock solid
DLT3C JIUHB:0310XPMW

Can do a little more, just not with my cooling in the summer

I wrote a short review of it if you want the details. I don't think this violates any rules posting this, if so please go easy, I swear I read the rules!

 

[cbakey]

I have a Asus A7N8X DLX rev 1.04, I have a SLK-800 with a smart fan 2 at 3550rpm running at 34c Full load at 163 x 12.5 sync, I have yet to take the poll becouse i know that my PC 2100 memory is my HUGE bottle neck, once i get the memory ill take the poll and repost, I dont know the full steping of my Proccesser but I know it is a DL3TC JIUHB, is there any way to see what the stepping is with out taking off the Heat sink?

EDIT: opps forgot to say that i am running defult voltage right now.

 

[Draven]

I´m on 2133.6MHz (133.3MHz FSB x Multiplier 16) with 1.54V.core and everything´s running stable.

 

[Draven]

Stepping: AXDA1700 JIUHB DLT3C

 

[Aslan]

2333MHZ @ 1.75v DLT3C JIUHB 0307. The temps were too high (57 Idle, 66 load with a SK7 + 92mm 33CFM NMB ) so I brought it down to 1900 @ 1.525v
It boots at 2450 (2500 no go ) but it isn't stable, so I can probably get it there with better cooling and a little more voltage (although I have heard of other 0307's being unable to take any more than 1.75v )

 

[BigL]

Just an update, the old core I listed turned out to be a DUT3C, my mistake.

My current core (AXDA1700DLT3C JIUHB 0310WPMW) is at 2.37GHz (205*[email protected]) is stable but maxed out with air cooling, must save for Prometia , next core is 0319 will update as soon as I know if its better or worse!!!

 

[felinusz]

I am currently stable at 2400 MHz @ 12 x 200; 1.825 Vcore; 47 DC load, 24 hour prime stable - I can run @ 2460 prime stable (205 x 12) with a 1.85 Vcore - but load temperatures go above 50 DC and scare me a little bit - so I backed down.

I can post and boot to windows @ 2.5 GHz (12.5 x 200, 1.85 Vcore), but temperatures are high and it isn't stable - I cannot raise my voltage above 1.85 in an attempt to obtain a stable 2500 MHz clock on air because my A7N8X-DLX Motherboard caps the Vcore too low...

My stepping is a 1700+ JIUHB DLT3C 0319.

 

[Goksly]

11*228 on air
currently testing 11.5*225 on water.

 

[LBJGH]

2500mhz day to day

2745mhz max post
2592mhz into windows

 

[cbakey]

I now have a NF7-s and i am running 220*11 witch is 2420 at 1.725 vcore. Stepping
JIUHB DL3TC 0310 MWXP I have an SLK-800 with a smart fan2 running at 3 grand and i am around 51°C.

 

[Q-Brix]

AMD Athlon XP 1700+ Tbred-B JUIHB

@ 1830mhz stable

cooled by barton2500+ amd boxed cooler (new revision with copper plate)

powered with 1,725 Volt (a problem with my gameserver-board abit kr7a-raid causes this low voltage)


Q-Brix

 

[LBJGH]

why don't you use the wire-in-socket mod to get a higher voltage?

AMD Athlon XP 1700+ Tbred-B JUIHB

@ 1830mhz stable

cooled by barton2500+ amd boxed cooler (new revision with copper plate)

powered with 1,725 Volt (a problem with my gameserver-board abit kr7a-raid causes this low voltage)


Q-Brix