Hyper 212 Evo problems

[CrustyButt]

Seems good to me.

I don't have an AMD so can't say with certainty, but with my i7 I run at 19c and hit 36c on 95% load.

Thanks all a million, I acually just ordered a new HAF 922 and TONS of fans, no matter what combination of fans I ran..The end result was I need better airflow..and I'm going to reseat when I get my case...Once again, thank you all for your help.

 

[manu2b]

Seems good to me.

I don't have an AMD so can't say with certainty, but with my i7 I run at 19c and hit 36c on 95% load.

You can't compare Sandy Bridge and Phenom as stated earlier.

With the same watercooling loop, I get:
4.1GHz/1.53v/45°C with the PhII x4 955
5.0GHz/1.48v/66°C with the 2600k

And, depending on the software you use to stress your CPU, temps will vary.
Still with the Phenom, I hit 45°C with Prime95/OCCT@100% load, and only 38°C using the AMD Overdrive stress test...

EDIT: don't get mad Crusty, not for you

 

[CrustyButt]

You can't compare Sandy Bridge and Phenom as stated earlier.

With the same watercooling loop, I get:
4.1GHz/1.53v/45°C with the PhII x4 955
5.0GHz/1.48v/66°C with the 2600k

And, depending on the software you use to stress your CPU, temps will vary.
Still with the Phenom, I hit 45°C with Prime95/OCCT@100% load, and only 38°C using the AMD Overdrive stress test...

EDIT: don't get mad Crusty, not for you

LOL

 

[kraver]

i would say definately more intake fans. i have 5 in and 3 out all 120mm or bigger.
also is the exhaust of your 212 faceing the rear exhaust fan? if not it probly would help with airflow

 

[Bigbaddie]

I'm having a problem with the hyper 212 evo too.. Its only spinning at around 600 RPM in my p8z68 vpro gen3 mobo. ANy help? It is plugged into the correct slot.

 

[CrustyButt]

Hey guys! I've had my new HAF 932 Advanced for about 4 days and love it. I have 3 120MM on the top, stock 140 in rear, 230 in front, 140 on bottom, and stock 230mm on side and I'm @ 1.4 V @ 4 ghz

Idle: 36-41 C
Load: 47-53 C