- Joined
- Feb 18, 2010
Hi,
I have an E2200 currently running at 3.575 Ghz (air cooled), prime 95 stable. I have kind of run into a brick wall. I have it running at the max voltage of my board which is 1.6v, any less and it is not stable. If I bump up the FSB any higher than 1300 it freezes and has none of it. I am wondering if increasing the NB voltage at all will help in regard to the freezing. I am kind of weary of over volting any other components on the board, because I don't want to replace it. The processor is another matter, it is a cheap processor that needs to be replaced anyways so if it fails no big deal (thus the 1.6v). Any comments or suggestions are welcome.
-Greg
I have an E2200 currently running at 3.575 Ghz (air cooled), prime 95 stable. I have kind of run into a brick wall. I have it running at the max voltage of my board which is 1.6v, any less and it is not stable. If I bump up the FSB any higher than 1300 it freezes and has none of it. I am wondering if increasing the NB voltage at all will help in regard to the freezing. I am kind of weary of over volting any other components on the board, because I don't want to replace it. The processor is another matter, it is a cheap processor that needs to be replaced anyways so if it fails no big deal (thus the 1.6v). Any comments or suggestions are welcome.
-Greg