Hello guys- I recently RMA'd my board with eVGA to receive the new version with better FSB support for quad core CPU's. My full spec's are in my signature; I was wondering if there are others on this board that have a similar setup, and what they are OC'ing to? I have done a lot of research and am finding that the FSB doesnt go up as high as i would like w/o errors and crashing. I am aware that my qx6700 is rated at a 1066 FSB. I was able to get a somewhat stable 3.4 clock with a 13X multi at 1077 FSB, but I would still get random crashing from time to time, but more importantly my CPU was still running a little hotter than I would have liked at load (69 degrees) with my new HSF (paired with a AeroCool Xtreme Turbine 120mm).
Do you guys recommend a higher FSB / lower multi or the opposite? I have read the stickies on the link and sync BIOS settings in the eVGA forums,but I am not sure what others think. Kingston rates my memory for 800 at 2.0v with a 4-4-4-12, but I think it should be lower and at 5-5-5-15 with higher OC? Is there still a problem with this board and 4 slots of memory filled? Any and all help would be greatly appreciated
Do you guys recommend a higher FSB / lower multi or the opposite? I have read the stickies on the link and sync BIOS settings in the eVGA forums,but I am not sure what others think. Kingston rates my memory for 800 at 2.0v with a 4-4-4-12, but I think it should be lower and at 5-5-5-15 with higher OC? Is there still a problem with this board and 4 slots of memory filled? Any and all help would be greatly appreciated