- Joined
- Apr 22, 2002
- Location
- Folding@Home in Ball Ground, GA
I've gotten a few of the 5902's now, and I getting:
4.4k on 8800GT
5.2k on 8800GTS
4.4k on 8800GT
5.2k on 8800GTS
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
From the linked threads;
That would fall under the varying time per frame category.
Project : 5902
Core : Unknown
Frames : 100
Credit : 1680
-- GPU1 --
Min. Time / Frame : 1mn 59s - 12197.65 ppd
Avg. Time / Frame : 2mn 00s - 12096.00 ppd
Cur. Time / Frame : 2mn 01s - 11996.03 ppd
R3F. Time / Frame : 2mn 01s - 11996.03 ppd
Eff. Time / Frame : 2mn 06s - 11520.00 ppd
-- GPU2 --
Min. Time / Frame : 3mn 23s - 7150.34 ppd
Avg. Time / Frame : 3mn 28s - 6978.46 ppd
Cur. Time / Frame : 3mn 29s - 6945.07 ppd
R3F. Time / Frame : 3mn 29s - 6945.07 ppd
Eff. Time / Frame : 3mn 28s - 6978.46 ppd
-- GPU3 --
Min. Time / Frame : 3mn 31s - 6879.24 ppd
Avg. Time / Frame : 3mn 33s - 6814.65 ppd
Cur. Time / Frame : 3mn 36s - 6720.00 ppd
R3F. Time / Frame : 3mn 36s - 6720.00 ppd
Eff. Time / Frame : 3mn 42s - 6538.38 ppd
Does anybody know if this lowers power consumed? I know when both my GPUs are running 5900s the power drops down quite a bit. Nobody else seemed to notice though.
I can tell if my cards are running Core 14 just by listening now. The temps don't get up high enough to make the fans go crazy .
If you check the linkage above, it indicates that p5900 units should be available to all donors. While p5902 units should be issued to those GPU clients running -advmethods.
Checked my rigs this evening, and it appears that they have released another large GPU WU, the 5903. Frame times appear to be the same as the 5902.
I did not set -advmethods flag to any of my GPU client (using GUI version), yet I'm still getting 5900 and 5902....... however, not that I'm complaining since much lower (5-10c!) core temp is very welcome!
The 5900 WU's are taking 10.8a to 15.2a on the HBRig (now 3x GTX 260 /216's). Where the 511 WU's pulled a constant 10.5a on the topside for 2 x 260 /216's. The draw just jumps up and down constantly.