Where do I go from here?

[darkjedi]

Heya guys,

Been running my 2500 mobile like this for about a year, since I've had it.. It's really stable and what not, but doing some reading it looks like I've got it all wrong and should pump up the FSB etc..

I just need to know how I can squeeze more outta this?? and what I can do with my RAM as well..

Here's what I have

Nvidia NF7S-2 (version 2.0)
2500 mobile running at 200x12.5
2x512 kingston valueram
480 truepower antec psu

runs at abour 40c idle, maybe 45c or so under load..

Any reommendations or info would be awesome... thanks guys..

-tawheed

 

[c627627]

At which point did you fail Prime95 Torture test?

 

[darkjedi]

At which point did you fail Prime95 Torture test?

Left it overnight, around 8 hours, with no fail..

thanks

-tawheed

 

[c627627]

OK. Drop the multi, increase Vdimm RAM voltage and push the FSB with a low multiplier to see what your FSB limitations are.

Then adjust the multiplier. Sooner or later you'll start getting errors in Prime95, it's not important what they are, they're just there to tell you need to back down.

The goal is to see what the highest FSB x lowest multi is...