only 8 of 16gb works

Psykoikonov · Jul 16, 2012

littlestraffen said:
its using the latest version

That's one more thing off the list of possibles. You have tried each stick individually, have you tried a "good" stick in each of the 4 slots or the 2 "good" sticks in the 2 different dual channel slot configurations?

freeagent · Jul 16, 2012

Sorry I was on my mobile, I missed that

littlestraffen · Jul 16, 2012

i did no error

littlestraffen · Jul 17, 2012

so the freezing stopped tnx for that.

but im going to a computer specialist for the ram and see what he will say
i will post how he fixed it (i hope he will)

littlestraffen · Aug 3, 2012

so he saided that the os doesnt support more than 8gb and i have to wait until there is a update

Psykoikonov · Aug 3, 2012

Win 7 Home Basic 64bit has a memory limit of 8GB (reference). For Home Premium 64bit it's 16GB. Professional 64bit, Enterprise 64bit and Ultimate 64bit are 192GB.

hokiealumnus · Aug 3, 2012

Psykoikonov said:
Win 7 Home Basic 64bit has a memory limit of 8GB (reference). For Home Premium 64bit it's 16GB. Professional 64bit, Enterprise 64bit and Ultimate 64bit are 192GB.

Yup. Apologies for the oversight littlestraffen; I made the assumption you had Home Premium or above.

littlestraffen · Aug 5, 2012

o so this is solved gonna upgrade from win7 version

littlestraffen · Aug 7, 2012

euh you say home preminium thats what is installed

littlestraffen · Aug 7, 2012

hokiealumnus said:
Yup. Apologies for the oversight littlestraffen; I made the assumption you had Home Premium or above.

euh you say home preminium thats what is installed on my cpomuter

hokiealumnus · Aug 9, 2012

Huh. If you have Home Premium x64, you should be able to run up to 16GB of memory and there is no need to upgrade.

Psykoikonov · Aug 9, 2012

littlestraffen said:
euh you say home preminium thats what is installed on my cpomuter

Then your OS (Win 7 64bit Home Premium) isn't the problem.

edit: didn't see hokiealumnus post

WhitehawkEQ · Aug 10, 2012

You may want to take the CPU off and see if there are any pins bent, I read a post http://www.overclockers.com/forums/showthread.php?t=711055

Check that out.

littlestraffen · Aug 10, 2012

WhitehawkEQ said:
You may want to take the CPU off and see if there are any pins bent, I read a post http://www.overclockers.com/forums/showthread.php?t=711055

Check that out.

well 2months ago is replaced the stock cpu whit a cm v8 but i had problems because the cpu cooler didnt came off the cpu so i one of the pins was bent so my dad fixed it to get the pin in the right possion so could that be it?

(srry if i made any mistakes in the language im tired)

WhitehawkEQ · Aug 11, 2012

If you replaced the stock CPU cooler "WITH"

a CM V8 and bent a pin, you may want to check again, when you go to remove the V8 cooler, wiggle the cooler so you don't pull the CPU chip out

littlestraffen said:
well 2months ago is replaced the stock cpu whit a cm v8 but i had problems because the cpu cooler didnt came off the cpu so i one of the pins was bent so my dad fixed it to get the pin in the right possion so could that be it?

(srry if i made any mistakes in the language im tired)

littlestraffen · Aug 14, 2012

my dad fixed it to get the pin straight so it will fit in the cpu socket

i checked the cpu not a single pin benged

only 8 of 16gb works

Psykoikonov

Member

freeagent

Member

littlestraffen

Registered

littlestraffen

Registered

littlestraffen

Registered

Psykoikonov

Member

hokiealumnus

Water Cooled Moderator

littlestraffen

Registered

littlestraffen

Registered

littlestraffen

Registered

hokiealumnus

Water Cooled Moderator

Psykoikonov

Member

WhitehawkEQ

Premium Member

littlestraffen

Registered

WhitehawkEQ

Premium Member

littlestraffen

Registered

Similar threads