another fx9590 instability related issue!! help! plz :p

[caddi daddi]

20 minutes please.

 

[S0lv3ntFl3X]

cpu temps (package) have reached 72c... socket is 82c :/

 

[S0lv3ntFl3X]

there you go. max temp on cpu was 73. by the third test it dropped a bit to 65-70c but no lock up so its a start.

 

[caddi daddi]

go into bios, in digi vrm, set it like this.
reduce vcore to 1.35

 

[S0lv3ntFl3X]

Done dude. P95 again? 20 mins again too?

 

[caddi daddi]

yes, please

 

[S0lv3ntFl3X]

ok done. results...



suprised at that temperature difference for just a 0.05v drop

 

[caddi daddi]

now, back into bios, set YOUR DEFAULT ram speed as I have mine set in pic 1



then into dram timing control, setting only the items I have set in pic 2 but, to YOUR DEFAULT ram timings.
yea, it's pretty boring, p95 again.

 

[S0lv3ntFl3X]

my ram is 1333mhz (1600 oc) dominator platinum.. you sure to set to 1866?

- - - Updated - - -

also my timings are 9 10 9 27 i think

 

[caddi daddi]

NO, you set it to YOUR DEFAULT SPEED!!!!!!
if your six say 1333, set it to 1333

 

[S0lv3ntFl3X]

ok then. on the sticks it says 1600mhz but the default is 1333 i have to usually set it to 1600. so will go in now and manually enter my speed and timings.

 

[caddi daddi]

we are heading for,
minimum vcore,
lowest core temps,
highest core speed,
nice and stable cores.
we don't care about ram right now, other than it is at default and stable.
if the stix list 1600, that is default and what we want it set too.

 

[S0lv3ntFl3X]

OK I need to know what to put for the row cycle time. You have 37. Mine by auto is 33. It doesn't say on the ram itself.

 

[caddi daddi]

33 will do fine please.

 

[S0lv3ntFl3X]

Ivery done all that. I used a formula on this page

http://www.overclock.net/t/381699/ram-timings-explained

The formula for mine worked out different but I just went with you saying 33.

- - - Updated - - -

If that formula is right your row should be 38. Mine should be 37. But I guess tighter timings are better?

- - - Updated - - -

Pc froze this time whilst loading chrome.

 

[caddi daddi]

then go losten that timing to 37.
did you set the speed and timings to YOUR STIX DEFAULT VALUES?

 

[S0lv3ntFl3X]

Yep 1600mhz 9,10,9,27 (but it's xmp ram. I checked the xmp profile and it's the same timings default value in bios is 1333mhz but xmp profile changes timings and bumps up to 1600mhz although ram labels say 1600mhz on them anyway.)

- - - Updated - - -

Will loosen to 37. Ifor issue persists I will down them to rams default of 1333 and out row cycle back to 33

 

[caddi daddi]

or just rest it all to auto for the time.

- - - Updated - - -

I love this stuff, I grab my 9590 rig out of the storage room and set it up on my desk.
after a little running it's peeing all over my desk like a grand baby when i have my sunday, go to meeting on......... but, that's just how I roll..............................

 

[S0lv3ntFl3X]

Lmfao well I've kept it Manuall but dropped back down to 1333mhz. And row cycle is on 33 again.

- - - Updated - - -

Edit. Froze again so it's all going back to auto haha.

 

[caddi daddi]

stable?