SOLVED I need a good MBM program please

[LiquidFusion]

I downloaded the Motherboard Montior,and the Shutdown program. I couldn't get the MBM5 to work all of the gauges were stuck at 0 and all 3 sensors never moved from 32deg C-did I have it set up wrong or does it not work with all boards?

 

[Irondog]

Try this one (http://web.bham.ac.uk/jst829/mbprobe7) It's a very good program, easy and very light!

 

[Joe Conflict]

Did you try going to the "temperature" blue button on the left and edit the sensor type " (My Bh6 needed "LM79" to work"), but keep in mind it will only monitor sensors that you actually have hooked up on the MB. Sensor#1 should be standard, but 2 and 3 you will need to add if your board has inputs for it. Also it will only monitor fan speeds on fans equipped with a 3rd "yellow" wire that carries the RPM info to the MB.