- Joined
- Feb 13, 2010
- Location
- Missouri
I have an Intel slot I Asus P2B which is a solid board with one exception. There is no Vcore adjusment... so not so solid I guess. Now there used to be articles on how to mod any slot 1 board for Vcore adjustment but these have long since vanished.
First of all the docs.
slot 1 pinout
Intel data sheet See page 19.
So obviously by closing vids 0, 1, 3 and 4 and leaving 2 open i can achieve 2.4v. This can be done using nail polish or tape on the actual processor pins themselves but it's a real PITA.
I assume the same can be acheived using a dip switch/switches connected to the corresponding pins on the back of the back of the motherboard.
The question I have is if I am looking for 2.4v only can I simply connect vid 4 to VSS? Or is this over simplifying things?
First of all the docs.
slot 1 pinout
Intel data sheet See page 19.
So obviously by closing vids 0, 1, 3 and 4 and leaving 2 open i can achieve 2.4v. This can be done using nail polish or tape on the actual processor pins themselves but it's a real PITA.
I assume the same can be acheived using a dip switch/switches connected to the corresponding pins on the back of the back of the motherboard.
The question I have is if I am looking for 2.4v only can I simply connect vid 4 to VSS? Or is this over simplifying things?