Kingmax PC-150 TinyBGA DRAM 256meg 6ns

[FrankMasterFlash]

I got some questions about these.
Will these hit 150mhz bus at cas 2-2-2?
Do they work in i440bx boards?
Any comments or experence with these chips or should I look towards different sticks?

TIA!

 

[Easto]

Don't BX boards top out at 100mhz FSB?

 

[Thelemac]

Nope, that they don't. With some modifications done by the board makers the bx goes well above that. Well, at least to 133.

 

[FrankMasterFlash]

Yeah...I know that this puppy can do 150mhz FSB but the ram is holding me back because with one stick its completely stable but with 2 it crashes, and I think im having some video problems with the high AGP speed but I think its heat related.

 

[Placid]

PC150-332 Specification
Maximum Operating Frequency = 150MHz

CAS Latency = 3
RAS to CAS Delay = 3
Precharge Delay = 2

Device Cycle Time = 6.6ns
Clock Access Time = 4.5ns
On-Board Serial Presence Detect (SPD)
Low Profile - 1 inch high (2.54cm)
JEDEC PC-133 SDRAM

http://www.kingmax.com/PC150/150english_series.htm

 

[FrankMasterFlash]

PC150-332 Specification
Maximum Operating Frequency = 150MHz

CAS Latency = 3
RAS to CAS Delay = 3
Precharge Delay = 2

Device Cycle Time = 6.6ns
Clock Access Time = 4.5ns
On-Board Serial Presence Detect (SPD)
Low Profile - 1 inch high (2.54cm)
JEDEC PC-133 SDRAM

http://www.kingmax.com/PC150/150english_series.htm

Thanks Placid....well I decided to look around to find some PC150 CAS 2 ram.