Wat vcore on your o/c P4 CPU ?

[Dark_templar]

Would wanna to know wat vcore u guys out there are using for ur P4 CPU. Would like to know wat is the average of most people here.
Dont mind pls state ur
1) Motherboard
2) Vcore
3) CPU
4) Wat Speed CPU is ?

Thankz in advance for all replies....

 

[Nephewkp]

GA-8KNXP
1.55V
3.0C (D1 )
3.45 stable

I think that my mobo limits my OC but it is a sweet board so I don't care that much.

 

[RubiX³]

p4 3.2C

1.65v - over 220FSB
1.55v - anything below or at 220FSB

 

[Albuquerque]

2.4 M0 at 3.4ghz on stock voltage
Will also do 3.0ghz on 1.2v...

 

[Dark_templar]

it seems that 2.4c M0 stepping is a great overclocker... too bad i cant find it in singapore.

 

[gustav]

1) P4C800-E Deluxe

2)1.65 (had it at 1.7 in bios, but it seems to be better at 1.65 in bios)

3)2.4ghz M0 stepping cpu

4)can do 3.6ghz, ram holding me back to 3.3 right now.

 

[Maxvla]

Would wanna to know wat vcore u guys out there are using for ur P4 CPU. Would like to know wat is the average of most people here.
Dont mind pls state ur
1) Motherboard: Abit AI7
2) Vcore 1.8
3) CPU 3.0c sl6wk
4) Wat Speed CPU is ? 3831mhz

Thankz in advance for all replies....

normal use its 1.725 3750mhz

 

[Lan_Of_Malkier]

1) GA-8IPE1000-L
2) 1.500v
3) 2.8c D1
4) 3368 MHz

 

[Digital_Cowboy]

p4 3.4C @3.913 GHz @ 1.7 VCore @ 30 degrees C

 

[Roboman101]

1.8a @ 2.66 @1.55

 

[Sucka]

Hey Digital_Cowboy, what does your vcore look like in mbm and under load? I have my 3.4C at the same clock, but i'm only at 1.6v in my bios, which is 1.65 idle, dropping as low as 1.55 during normal use. This is on a P4P800 Deluxe.

 

[Flakk]

1) Motherboard? Asus P4P800 Deluxe
2) Vcore? 1.535
3) CPU? P4 1.8A
4) Wat Speed CPU is? 3.06ghz 100% prime stable

 

[DrSpanky]

1) FIC VC11
2) 1.85
3) 1.7ghz p4
4) 2142mhz

 

[Lancelot]

1) Motherboard? Asus P4P800
2) Vcore? 1.400 (stock)
3) CPU? P4 2.80E (Prescott)
4) Wat Speed CPU is? 3.22Ghz 100% Prime95 stable

 

[Clutch_Head]

• IS7 version 1.0 (Vdim modded)
• 1.525 in bios. 1.5 idle, 1.475 under load (volt meter)
• 2.4C 6L6WF Malay (D1 stepping )
• 3.5Ghz (292mhz FSB)

[stable pic]

[/stable pic]

rich

 

[fhanderson]

Albatron 845PE Pro II
P4 2G
1.575V
3.1G

 

[Big Nuttz]

1) P4C800 Deluxe
2) 1.6v
3) 2.4c(SL6Z3)
4) 3.9

1) P4C800-E Deluxe
2) 1.65v
3) 3.0c(SL6WU)
4) 4.0

 

[Digital_Cowboy]

Hey Digital_Cowboy, what does your vcore look like in mbm and under load? I have my 3.4C at the same clock, but i'm only at 1.6v in my bios, which is 1.65 idle, dropping as low as 1.55 during normal use. This is on a P4P800 Deluxe.

My MBM says 1.7v idle and 1.67 full load.

 

[Joker76]

1) Abit IC7
2) 1.5v (stock)
3) 2.4c (unsure of stepping)
4) 3.06Ghz

I'm sure I could go alot higher on this chip if I upped the Vcore a bit and switched my ram from 1:1. I'm just happy with the performance it gets now, so there's no need to push my luck.

 

[Dark_templar]

I think i should post mine too.

P4P800D
1.525v (set in bios)
2.4c(SL6WF)
3.18Ghz


IC7-Max3
1.525v (set in bios)
2.8c(SL6Z5)
3.4Ghz