Montech Launches AIR 903 BASE AIR 903 MAX E-ATX Mid-Tower Case

Montech just launched the AIR 903 BASE and AIR 903 MAX mid-tower chassis. With a focus on airflow, the AIR 903 BASE features three pre-installed 140 mm PWM fans. The MAX comes with four, three addressable RGB at the front and a non-ARGB at the rear. These mid-tower chassis are capable of housing large E-ATX motherboards and “any flagship RTX 4090 GPU”. Pricing starts at just $65 for BASE model in black. With the most expensive model, the white MAX, at only $79, these are priced to be within anyone’s budget.

MONTECH Launches the Ultimate Cooling Beast – AIR 903 MAX and AIR 903 BASE

Ultra-cooling Mid Tower with Max Capacity

• 51% Porosity Ventilation Rate
• Fine Mesh Front Panel
• AIR 903 MAX – Pre-installed HP140 Fans (3 x 140mm ARGB PWM + 1 x 140mm PWM)
• AIR 903 BASE – Pre-installed HP140 Fans (3 x 140mm PWM)
• 21 Built-in RGB Lighting Modes
• Supports Motherboards E-ATX to SSI-EEB
• Supports 360mm AIO Coolers/ 180mm CPU Tower Coolers
• Clearance for large GPUs (400mm x 190mm)
• Compatible with any flagship 4090 GPUs
• Max Drive Bays: 2 x HDD + 4SSD/ 1 x HDD + 5 x SDD
• Vertical GPU Mounting Supported with Additional Accessory

​Taipei, Taiwan – MONTECH, an innovative PC components and peripherals brand, announces the launch of its newest addition to the AIR PC Case series – AIR 903. Manufactured with premium grade materials and innovative design; the AIR 903 offers users a wide range of build options along with enhanced cooling performance. The AIR 903 is available in AIR 903 MAX and AIR 903 BASE, available in both black and white.

High-Performance Airflow
​In order to provide users with maximum airflow for high-performance use, the AIR 903 series features an ultra-cooling front panel offering 51% porosity ventilation rate. Dust filters are also equipped at the top and bottom of the case for all-around dust protection.

Pre-Installed 4x140mm PWM Fans
​AIR 903 BASE is equipped with 3 pre-installed HP140 high-performance cooling fans with PWM functions. On the other hand, AIR 903 MAX, is equipped with 4 pre-installed HP140, 3 of which are mounted at the front and features ARGB, and a single HP140 PWM at the rear. The pre-installed fans are connected to MONTECH’s LED/PWM controller – allowing users to easily switch between 21 RGB modes with the LED button. (Please note: controller only available for AIR 903 MAX)

Both cases can support up to a total of up to 9 x 120mm fans, or 6 x 140mm and 2 x 120mm cooling fans offering users the ultimate cooling experience. The fan RPM for both cases can be manually adjusted through BIOS.

Hardware Compatibility
​AIR 903 is designed and engineered for maximum capacity, compatible for both air cooling and water cooling support. Able to support 360mm AIO coolers at the front and top, or a maximum height of 180mm for CPU tower coolers. Furthermore, supporting graphic cards of up to 400mm length and 190mm width, with a 240mm clearance for PSU. It is also compatible with any flagship 4090 GPUs.

In addition, the AIR 903 not only supports True E-ATX form factors, but also SSI-EEB motherboards. Featuring 5 SSD and 2 HDD drive bays, as well as an USB TYPE-C port and USB 3.0 ports.

Easy Cable Management
​In order to provide users with a user-friendly cable management system and easy access, the AIR 903 series features a spacious 27mm cable route with rubber grommets and velcro straps.

Vertical GPU Mounting
​MONTECH AIR 903 features a GPU clearance of 400mm in length and 190mm in width for maximum capacity. All PCIe slot covers can be removed to install MONTECH’s vertical GPU mounting kit sold separately.
​https://www.montechpc.com/en/products_detail.php?nid=305&s_ok2=​

MSRP

AIR 903 BASE

AIR 903 MAX

Available on Amazon:

AIR 903 BASE (black): www.amazon.com/dp/B0C98RFQXJ

AIR 903 BASE (white): www.amazon.com/dp/B0C98TR925

AIR 903 MAX (black): www.amazon.com/dp/B0C98RRPXL

AIR 903 MAX (white): www.amazon.com/dp/B0C98SZCSG

-John Nester (Blaylock)