PROJECT LOG TOXIC CHROME (modded Corsair 250D)

[Silver_Pharaoh]

Yeah those EK res's look great!

I should have looked into those reservoirs when I was buying mine. Next time lol.
Dying the loop again? or coloured tubing? Can't wait to see it all installed!

 

[bob4933]

Holy cow that ruler! I just ordered one haha

Build looking good dude!

 

[alexciobanu]

Yeah those EK res's look great!

I should have looked into those reservoirs when I was buying mine. Next time lol.
Dying the loop again? or coloured tubing? Can't wait to see it all installed!

I will be using Mayhems X1 Clear UV Blue. So it's fully clear under normal light but goes blue under UV or blue light. I'm gonna have RGB LED strips inside this time so can cycle through them. Should give it a nice effect. And yea clear tubing throughout.

Holy cow that ruler! I just ordered one haha

Build looking good dude!

Yea it's awesome. Can't wait to receive mine. The MNPCTECH package is on the way

 

[bob4933]

Oh fwiw, "Chrome spray paint" looks absolutely terrible.

Here are some options for you

http://www.amazon.com/Chrome-Sign-Vinyl-Self-adhesive-12/dp/B009W6HM22

or
Find someone who does "spray on chrome"

or
http://www.alsacorp.com/products/killercans/kc/killerchrome.htm#mirraclear


this stuff -> http://mbworld.org/forums/attachmen...10s-c-class-w-pictures-chrome-spray-paint.jpg

is utterly useless. You can NOT clear coat, sand, or buff it. It may look "ok" at first, but over time, the paint will oxidize and it will just look nasty.

 

[alexciobanu]

Oh fwiw, "Chrome spray paint" looks absolutely terrible.

Here are some options for you

http://www.amazon.com/Chrome-Sign-Vinyl-Self-adhesive-12/dp/B009W6HM22

or
Find someone who does "spray on chrome"

or
http://www.alsacorp.com/products/killercans/kc/killerchrome.htm#mirraclear


this stuff -> http://mbworld.org/forums/attachmen...10s-c-class-w-pictures-chrome-spray-paint.jpg

is utterly useless. You can NOT clear coat, sand, or buff it. It may look "ok" at first, but over time, the paint will oxidize and it will just look nasty.

Thanks for the info dude. Damn, that Killer Chrome looks awesome. The case is actually at the powder coating place atm. I will see how the chrome powder coat looks at first and go from there.

 

[alexciobanu]

Hey guys,

Back with another update on Toxic Chrome.

I made all the modifications needed on the case and it has now left to get powder coated. The frame of the case and other bits will be powder coated a dark navy blue and the side and top panels will be powder coated chrome. Hopefully the chrome powder coat will come out good.

Here's a look at the case with the side panel windows cut, filed and all ready. Also mounted the pump/res combo and drilled the hole for the Vandal switch. That is just a test Vandal switch. I will be receiving a nickel plated one from MNPCTECH which is currently on the way.



I know here that the res doesn't sit in the middle but in order to make the loop work I think that this is how I will need to sit it. This may change however so we will see.





All the side panel windows. I went and drilled holes in each corners of the windows for mounting the acrylic however I forgot to take pics of this. You guys will see that once the case is back.



Pump/res combo mounted.



Vandal switch mounted on top of the front panel frame.







I will be making a new front panel out of 1mm aluminum which will cover this section here. I will stick that to the existing front panel in order to continue to be able to use the clip on and feature and access the dust filter behind it.



I also cut the HDD cage in half as I will need to mount this back in the case to support the MB tray. I cut some 1mm aluminum panels which will be bolted on to help clean up the HDD cage look as that will be seen through the res window.





All this will be powder coated blue.

And that's about it for now. Hopefully I will get the case powder coated and back sometime next week.

Thanks for checking it out.

Cheers,

Alex

 

[Blaylock]

That's a nice start alex. Powder coat is really the only correct way to go.

 

[bob4933]

Ah powder coating chrome is a decent solution. It's more silver than chrome, as it doesn't reflect the blues like actual chrome.

 

[Silver_Pharaoh]

Mmmmm powder coating

 

[alexciobanu]

That's a nice start alex. Powder coat is really the only correct way to go.

Ah powder coating chrome is a decent solution. It's more silver than chrome, as it doesn't reflect the blues like actual chrome.

Mmmmm powder coating

Thanks guys! I'm excited for the powder coating too!

 

[alexciobanu]

Hey guys,

I got the case back from powder coating!

Here are some quick shots I took of the case. I think the navy blue looks awesome and matches the fan blade colour really well.

The side panels are not finished yet as they had mistakenly coated them the same navy blue, they are now getting redone in chrome.































I will be getting the front panel and rear feet colour matched to the same powder coated blue but will obviously get it painted.









Thanks for checking it out guys and let me know what you think of the blue, I really like it.

Cheers,

Alex

 

[Silver_Pharaoh]

Oooooh a deep blue!

oh yes, I like where this colour scheme is going!!

 

[alexciobanu]

Oooooh a deep blue!

oh yes, I like where this colour scheme is going!!

Thanks a lot mate

 

[alexciobanu]

Hey guys,

Back with another update for the Toxic Chrome build. Sorry I've been absent for a while, been super busy with work lately.

Had some time over the weekend and worked on the motherboard.

Here's an overview and getting the red heatsinks ready for some black plasti dip!















Also plasti dipping this little guy!















I'll be back in a day or two once all this is done, dried and back on the board!

Also an update on the side panels paint/powder coat. I've seen the chrome powder coat and it doesn't look like chrome at all. Looks like some sort of dark grey colour and not really glossy, so was not a fan of that. I did get them to do the EK ram modules which I will show you guys once done, just to see how the chrome powder coat looks. Through I probably won't end up using those either.

So what I will be doing with the side panels is taking them to a car paint shop. Chrome paint is out of my price range at this time, costing around $250 just for the paint as they told me. Though what they can do is make it a nice glossy silver and try and get it as close as possible to the chrome effect. However that still won't end up being chrome so I guess we will see.

Stay tuned for more guys! I'll try and keep the updates coming more regularly!

Cheers,

Alex

 

[Blaylock]

Sorry to hear about the chrome issues Alex. I thought that powder coating was the second best way next to dipping.

 

[alexciobanu]

Sorry to hear about the chrome issues Alex. I thought that powder coating was the second best way next to dipping.

Thanks. Yea, hopefully the glossy silver comes out good

 

[alexciobanu]

Hey guys,

Motherboard is all done, here it is!

Gigabyte GA-Z97N-Gaming 5 Black Edition



























I'm also happy to announce new sponsors to the Toxic Chrome build. The cables and LED strips will now be provided by Icemodz and also Primochill who are very kind to send me a set of fittings and some PETG tubing! :thumb:

Thanks for checking it out,

Cheers,

Alex

 

[Silver_Pharaoh]

Those parts turned out real nice!!

 

[alexciobanu]

Those parts turned out real nice!!

Thanks mate!

 

[alexciobanu]

Hey guys,

Here are some photos of the G.Skill memory I will be using and also the EK memory modules.

These have been powder coated chrome and as you can see it looks more like a matte silver, so that's why I didn't like the chrome powder coat for the side panels. I will be getting new ram modules and keeping them black but wanted to show you guys this anyway.



















Also cleaned up the rear i/o shield





Suits the build better this way!




Stay tuned for more!


Cheers,

Alex